User manual
Table Of Contents
- 1 SAFETY
- 2 GETTING STARTED
- 3 FEATURES
- 3.1 Activation and pre-checks
- 3.2 Alarms, warnings and notifications
- 3.3 Apnea timer
- 3.4 Backlight
- 3.5 Battery indicators
- 3.6 Calendar clock
- 3.7 Display contrast
- 3.8 Depth alarm
- 3.9 Dive history
- 3.10 Dive modes
- 3.11 Dive time alarm
- 3.12 Sample rate
- 3.13 Stopwatch
- 3.14 Surface and no-fly time
- 3.15 Tones
- 3.16 Water contact
- 4 CARE AND SUPPORT
- 5 REFERENCE
WARNING: Allergic reactions or skin irritations may occur when
product is in contact with skin, even though our products comply
with industry standards. In such event, stop use immediately and
consult a doctor.
WARNING: Not for professional use! Suunto dive computers are
intended for recreational use only. The demands of commercial or
professional diving may expose the diver to depths and conditions
that tend to increase the risk of decompression sickness (DCS).
Therefore, Suunto strongly recommends that the device not be used
for any commercial or professional diving activities.
WARNING:
USE BACKUP INSTRUMENTS! Ensure that you use
backup instrumentation, including a depth gauge and a timer or
watch.
WARNING: For safety reasons, you should never dive alone. Dive
with a designated buddy. You should also stay with others for an
extended time after a dive as the onset of possible DCS may be
delayed or triggered by surface activities.
WARNING:
PERFORM PRE-CHECKS! Always check that your dive
computer is functioning properly before diving. Check that the
display is working, the battery level is OK, and so forth.
6