User manual
Table Of Contents
- 1 SAFETY
- 2 GETTING STARTED
- 3 FEATURES
- 3.1 Activation and pre-checks
- 3.2 Alarms, warnings and notifications
- 3.3 Apnea timer
- 3.4 Backlight
- 3.5 Battery indicators
- 3.6 Calendar clock
- 3.7 Display contrast
- 3.8 Depth alarm
- 3.9 Dive history
- 3.10 Dive modes
- 3.11 Dive time alarm
- 3.12 Sample rate
- 3.13 Stopwatch
- 3.14 Surface and no-fly time
- 3.15 Tones
- 3.16 Water contact
- 4 CARE AND SUPPORT
- 5 REFERENCE
4.3 Battery replacement
Suunto D4f displays a battery symbol as a warning when the power
gets too low. When this happens, your Suunto D4f should not be
used for diving until the battery has been replaced.
Contact an authorized Suunto service center for battery
replacement. It is imperative that the change is made in a proper
manner to avoid any leakage of water into the battery
compartment or computer.
Defects caused by improper battery installation are not covered by
the warranty.
All history and logbook data, as well as the altitude, personal and
alarm settings, remain in the dive computer memory after the
battery change. Other settings revert back to default values.
34