User manual

2.
Press [DOWN] or [UP] to scroll to ALARM TIME.
3. Press [UP] to toggle the alarm on and press [SELECT] to confirm.
4. Adjust the duration with [UP] or [DOWN] and accept with
[SELECT].
5. Press [MODE] to exit.
3.12 Sample rate
The sample rate controls how often information from the dive is
saved to the active log. The default sample rate is 2 seconds.
To change the sample rate:
1. While in a dive mode, keep [DOWN] pressed.
2.
Press [UP] to scroll to Sample Rate and press [SELECT].
3. Press [DOWN] or [UP] to change the rate and confirm with
[SELECT].
4.
Press MODE to exit.
The sample rate options are: 1, 2 and 5 seconds.
3.13 Stopwatch
The stopwatch can be used to measure elapsed and split times.
To activate the stopwatch:
1. While in time mode, scroll through the bottom row view by
pressing [UP] or [DOWN] until the stopwatch is displayed.
27