User manual
Table Of Contents
- 1 SAFETY
- 2 GETTING STARTED
- 3 FEATURES
- 3.1 Activation and pre-checks
- 3.2 Alarms, warnings and notifications
- 3.3 Apnea timer
- 3.4 Backlight
- 3.5 Battery indicators
- 3.6 Calendar clock
- 3.7 Display contrast
- 3.8 Depth alarm
- 3.9 Dive history
- 3.10 Dive modes
- 3.11 Dive time alarm
- 3.12 Sample rate
- 3.13 Stopwatch
- 3.14 Surface and no-fly time
- 3.15 Tones
- 3.16 Water contact
- 4 CARE AND SUPPORT
- 5 REFERENCE
•
maximum depth
•
surface time after previous dive
•
average depth
3. Dive profile
•
Dive profile graph
•
water temperature
•
depth/time profile of the dive
Press [UP] to step through the dive profile graph or keep [UP]
pressed to auto-scroll.
The dive profile graph shows point by point dive information.
The End of Logs text is displayed between the oldest and most
recent dive.
The logbook capacity depends on the sample rate. With the default
setting (2 sec), the capacity is approximately 3.5 hours.
If the memory is full, when new dives are added, the oldest dives
are deleted.
The contents of the memory remain when the battery is changed
(providing that the battery has been replaced according to the
instructions).
3.9.1 Dive numbering
Repetitive dives on the same day are considered part of the same
dive series.
Within each series, the dives are given numbers. The first dive of the
series is
DIVE 1
, the second
DIVE 2
, and so on.
23