User manual
Table Of Contents
- 1 SAFETY
- 2 GETTING STARTED
- 3 FEATURES
- 3.1 Activation and pre-checks
- 3.2 Alarms, warnings and notifications
- 3.3 Apnea timer
- 3.4 Backlight
- 3.5 Battery indicators
- 3.6 Calendar clock
- 3.7 Display contrast
- 3.8 Depth alarm
- 3.9 Dive history
- 3.10 Dive modes
- 3.11 Dive time alarm
- 3.12 Sample rate
- 3.13 Stopwatch
- 3.14 Surface and no-fly time
- 3.15 Tones
- 3.16 Water contact
- 4 CARE AND SUPPORT
- 5 REFERENCE
3.9 Dive history
Suunto D4f has a detailed logbook and dive history available in
memory mode.
The logbook contains a sophisticated dive profile for each recorded
dive. The time between each data point saved in the log is based on
the configurable sample rate (see
3.12 Sample rate
).
The dive history is a summary of all recorded dives.
To access dive history:
1.
Press [MODE] until you see MEM.
2.
Switch between History and Logbook with [DOWN] or [UP].
3. When you are viewing the history or logbook, you can press
[MODE] to go back and select the other one. Press [MODE] a
second time to exit.
History
When you have entered the dive history view, you can switch
between Scuba History and FREE DIVE HISTORY with [DOWN] and
[UP].
Scuba dive history shows you a summary of the following:
•
Dive hours (if a single dive exceeds 10 minutes)
•
Total number of dives
•
Maximum depth
The scuba dive history records a maximum of 999 dives and 999
diving hours. When these limits are reached, the counters reset to
zero.
21