Owner's Manual
Table Of Contents
- User Guide
- Table of Contents
- 1 SAFETY
- 2 Welcome
- 3 Introduction
- 4 Getting started
- 5 General settings
- 6 Using time mode
- 7 Using ALTI & BARO mode
- 8 Using compass mode
- 9 Using memory
- 10 Replacing battery
- 11 Specifications
- 12 Warranty
- Index
To calibrate the compass:
1. Keep the device level, do not tilt it in any directions.
2. Slowly rotate the device clockwise (around 15 seconds per round) until
the compass is activated.
NOTE: If you notice deviations in the compass, you can recalibrate it by keeping
it level and rotating it slowly clockwise 5-10 times while in compass mode.
TIP: Re-calibrate the compass before each use for best possible accuracy.
38