Owner's Manual

TIP: When you have stopped the log recorder, you can enter the logbook and
view your current recordings before you reset the recorder.
Possible real life situation: Recording altitude
You’re going on another mountain hike. This time you want to record how much
you ascend and descend so as to compare the figures with previous hikes. You set
your Suunto Core to the ALTIMETER profile and start the log recorder when you
begin the hike. After the hike you stop your log recorder and reset it . Now you can
compare it with your previous logs.
7.6 Using barometer profile
The BAROMETER profile shows the current sea level air pressure. This is based
on the reference values given and the constantly measured absolute air
pressure. Changes in sea level air pressure are presented graphically in the
middle of the display. The display shows the recording of the last 24 hours with
a recording interval of 30 minutes.
When the BAROMETER profile is activated, the word BARO is underlined on the
display.
When the BAROMETER profile is activated, you can access the following views
with [View]:
●
Temperature: measures the current temperature
●
Log recorder: records the altitude changes in logs
●
Altitude reference: shows the altitude reference value
●
Time: shows the current time
●
Empty: no additional view
32