Owner's Manual
Table Of Contents
- User Guide
- Table of Contents
- 1 SAFETY
- 2 Welcome
- 3 Introduction
- 4 Getting started
- 5 General settings
- 6 Using time mode
- 7 Using ALTI & BARO mode
- 8 Using compass mode
- 9 Using memory
- 10 Replacing battery
- 11 Specifications
- 12 Warranty
- Index
20
Menu
In MENU you can change values, change the general settings and units, or view
logs stored in the logbook. To enter MENU, keep the middle right [Mode] button
pressed while in the TIME, ALTI & BARO or COMPASS mode. The segments in the
outer part of the display indicate your transition time. Exit MENU by pressing
the upper left [Start Stop] button. Whenever an exit option is available in MENU,
this is indicated with an "X" on the screen next to the [Start Stop] button. Get
familiar with entering and exiting MENU!
Backlight
You can activate the backlight in any mode by pressing the lower right [- Light]
button. The backlight turns off automatically after 5 seconds. If you want to
see the backlight when you are in MENU, you need to activate it in the TIME,
ALTI & BARO or COMPASS mode before entering MENU. The backlight will return
to normal when you return to a mode.
11
en