Operation Manual

Scroll with [Next] through summary views, until you reach the distance

summary. Adjust the distance shown on the display to the actual distance

you ran with [Start Stop] and [Light Lock]. Confirm with [Next].

7. Confirm the POD calibration by pressing [Start Stop]. Your foot POD has

now been calibrated.

NOTE: If the foot POD connection was unstable during the calibration

exercise, you might not be able to adjust the distance in the distance summary.

Make sure that foot POD is attached properly according to instructions and try

again.

If you are running without a foot POD, you can still get running cadence

from the your wrist. Running cadence measured from wrist is used together

with FusedSpeed and is always on for specific sport modes including

running, trail running, treadmill, orienteering, and track and field.

If a foot POD is found at start of an exercise, running cadence measured from

wrist is overwritten by foot POD cadence.