Operation Manual

The service menu includes the following items:
•
INFO:
o
Version: shows the current software and hardware version of your
Suunto Ambit2 R.
•
TEST:
o
LCD test: allows you to test that the LCD works properly.
•
ACTION:
o
Power off: allows you to put the watch into deep sleep.
o
GPS reset: allows you to reset GPS.
NOTE: POWER OFF is a low power state. Connect the USB cable (with power
source) to wake up the watch. The initial setup wizard starts. However, prior
values are not erased, so you just need to confirm each step.
NOTE: The watch switches to power saving mode when it is static for 10
minutes. The watch re-activates when moved.
NOTE: Service menu content is subject to change without notice during
updates.
Resetting GPS
In case the GPS unit cannot find a signal, you can reset GPS data in the
service menu.
To reset GPS:
1. In the service menu, scroll to ACTION with [Light Lock] and enter with
[Next].
89