Operation Manual

The compass will switch itself to power saving mode after one minute.

Reactivate it with [Start Stop].

For information on using compass during exercise, see Section 9.6.4 Using

compass during exercise on page 43.

12.1 Calibrating compass

COMPASS mode asks you to calibrate the compass before you start using it.

If you have already calibrated the compass and want to re-calibrate it, you

can access the calibration option in the options menu.

To calibrate the compass:

1. Keep [Next] pressed to enter the options menu.

2. Scroll to GENERAL using [Light Lock] and enter with [Next].

3. Scroll to Compass using [Start Stop] or [Light Lock] and enter with

[Next].

4. Press [Next] to select Calibration.

5. Turn and tilt the watch in multiple directions until the watch beeps,

indicated calibration is complete.