Operation Manual

6. Press [Next] to select Navigate.

7. If you selected a waypoint in the middle of the route, Suunto Ambit2 R

prompts you to select the direction of the navigation. Press [Start

Stop] to select Forwards or [Light Lock] to select Backwards.

If you selected the first waypoint as the starting point, Suunto Ambit2 R

navigates the route forward (from the first to the last waypoint). If you

selected the last waypoint as the starting point, Suunto Ambit2 R

navigates the route backwards (from the last to the first waypoint).

8. If you are using the compass for the first time, you need to calibrate it.

For more information, see Section 12.1 Calibrating compass on page

81. After activating the compass, the watch starts searching for a GPS

signal and displays GPS found after acquiring the signal.

9. Start navigating to the first waypoint on the route. The watch informs

you when you are approaching the waypoint and automatically starts

navigating to the next waypoint on the route.

10. Before the last waypoint on the route the watch informs you that you

have arrived at your destination.