Operation Manual

TIP: You can create POIs in Movescount by selecting a location on a map or
inserting the coordinates. POIs in your Suunto Ambit2 R and in Movescount are
always synchronized when you connect the watch to Movescount.
11.3.2 Navigating to a point of interest (POI)
Suunto Ambit2 R includes GPS navigation which allows you to navigate to
a pre-defined destination stored as a POI.
NOTE: You can also navigate when you are recording an exercise, see
Section 9.6.6 Navigating during exercise on page 45.
To navigate to a POI:
1. Enter a sport mode that has GPS activated and keep [Next] pressed to
access the options menu.
2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Scroll to POIs (Points of interest) using [Light Lock] and select with
[Next].
The watch displays the number of saved POIs and free space available
for new POIs.
4. Scroll to the POI you wish to navigate to with [Start Stop] or [Light
Lock] and select with [Next].
5. Press [Next] to select Navigate.
If you are using the compass for the first time, you need to calibrate it.
For more information, see Section 12.1 Calibrating compass on page
81. After activating the compass, the watch starts searching for a GPS
signal and displays GPS found after acquiring the signal.
67