Operation Manual

You can store up to 100 POIs in the watch. Note that also routes take up this
quota. For example, if you have a route with 60 waypoints, you can
additionally store 40 POIs in the watch.
You can select a POI type (icon) and POI name from a pre-defined list, or
freely name the POIs in Movescount. The pre-defined icons are listed in
Chapter 15 Icons on page 95.
To save a location as a POI:
1. Enter a sport mode that has GPS activated and keep [Next] pressed to
access the options menu.
2. Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3. Press [Next] to select Location.
4. Select Current or DEFINE to manually change longitude and latitude
values.
5. Press [Start Stop] to save the location.
6. Select a suitable POI type for the location. Scroll through the POI types
with [Start Stop] or [Light Lock]. Select a POI type with [Next].
7. Select a suitable name for the location. Scroll through the name options
with [Start Stop] or [Light Lock]. Select a name with [Next].
8. Press [Start Stop] to save the POI.
65