Operation Manual

1. Go to www.movescount.com/moveslink and install the Moveslink

application.

2. Connect your Suunto Ambit2 R to your computer with the Suunto USB

cable. The Moveslink application will automatically check for software

updates. If an update is available, your watch will be updated.

NOTE: You can use the Moveslink application without registering to

Movescount. However, Movescount greatly extends the usability, personalization

and settings options of your Suunto Ambit2 R. It also visualizes recorded tracks

and other data from your activities. Therefore, it is recommended to create a

Movescount account in order to utilize the full potential of the watch.

6.3 Custom sport modes

In addition to the default sport modes stored in the watch (see

Section 9.1 Sport modes on page 33), you can create and edit custom sport

modes in Movescount.

A custom sport mode can contain 1 to 8 different sport mode displays. You

can choose which data appears on each display from a comprehensive list.

You can customize, for example, sports-specific heart rate limits, autolap

distance, or the recording rate to optimize accuracy and battery duration.

Any sport mode with GPS activated can also use the Quick Navigation option.

By default, this option is off. When you select POI or Route, you get a pop-

up list of the POIs or routes you have defined in your watch at the start of

your exercise.

You can transfer up to 10 different sport modes created in Movescount to

your Suunto Ambit2 R. Only one sport mode can be active at a time.