1.0

3.27 Points of interest
Suunto Ambit3 Vertical includes GPS navigation which allows you to
navigate to a pre-defined destination stored as a point of interest
(POI).
NOTE: You can also navigate when you are recording an
exercise (see 3.11.7 Navigating during exercise).
To navigate to a POI:
1. Press [Start Stop] to enter the start menu.
2.
Scroll to NAVIGATION using [Start Stop] and enter with [Next].
3.
Scroll to POIs (Points of interest) with [Light Lock] and select
with [Next].
The watch displays the number of saved POIs and free space
available for new POIs.
4. Scroll to the POI you wish to navigate to with [Start Stop] or
[Light Lock] and select with [Next].
5.
Press [Next] to select
Navigate
.
If you are using the compass for the first time, you need to
calibrate it (see
3.8.1 Calibrating compass ). After activating the
compass, the watch starts searching for a GPS signal and
indicates when the signal is acquired.
6. Start navigating to the POI. The watch displays the following
information:
•
indicator showing the direction to your target (see further
explanation below)
69