1.0
Table Of Contents
- 1 SAFETY
- 2 GETTING STARTED
- 3 FEATURES
- 3.1 3D distance
- 3.2 Ascent history
- 3.3 Activity monitoring
- 3.4 Autopause
- 3.5 Autoscroll
- 3.6 Backlight
- 3.7 Button lock
- 3.8 Compass
- 3.9 Countdown timer
- 3.10 Displays
- 3.11 Exercising with sport modes
- 3.12 Find back
- 3.13 Firmware updates
- 3.14 FusedAlti
- 3.15 FusedSpeed
- 3.16 Icons
- 3.17 Interval timer
- 3.18 Interval workouts
- 3.19 Logbook
- 3.20 Memory left indicator
- 3.21 Movescount
- 3.22 Movescount mobile app
- 3.23 Multisport training
- 3.24 Navigating with GPS
- 3.25 Notifications
- 3.26 PODs and HR sensors
- 3.27 Points of interest
- 3.28 Recovery
- 3.29 Routes
- 3.30 Running performance level
- 3.31 Service menu
- 3.32 Shortcuts
- 3.33 Sport modes
- 3.34 Stopwatch
- 3.35 Suunto Apps
- 3.36 Swimming
- 3.37 Time
- 3.38 Tones and vibration
- 3.39 Track back
- 3.40 Training programs
- 4 CARE AND SUPPORT
- 5 REFERENCE
1. 2. 3.
Calibration
successful
150(150)
Auto zero
ON
Auto zero
setting...
Auto zero
You can calibrate the slope for power PODs that use Crank Torque
Frequency (CTF).
To calibrate the slope:
1. After the power POD calibration is complete, press [Start Stop].
2. Set the correct value according to your power POD manual with
[Light Lock] and accept with [Next].
3. Wait until the setting is completed.
4. Repeat procedure if setting fails or power POD is lost.
1. 2. 3.
Calibration
successful
150(150)
Slope
10.0 Nm/Hz
Setting
slope...
Slope
68