1.0

4. Sync your Suunto Ambit3 Peak with Movescount using Suunto
Movescount App (manually start sync, see 3.20.2 Syncing with
mobile app ) or by using Moveslink and the supplied USB cable.
3.26.1 Navigating a route
You can navigate a route you have downloaded to your Suunto
Ambit3 Peak from Movescount (see 3.26 Routes ) or recorded from
an exercise (see 3.10.5 Recording tracks ).
TIP: You can also navigate as a sport mode (see3.10.7 Navigating
during exercise).
To navigate a route:
1. Press [Start Stop] to enter the start menu.
2.
Scroll to
NAVIGATION
with [Start Stop] and enter with [Next].
3.
Scroll to
Routes
with [Start Stop] and enter with [Next].
The watch displays the number of saved routes and after that a
list of all your routes.
4. Scroll to the route you want to navigate with [Start Stop] or
[Light Lock]. Select with [Next].
5. The watch displays all the waypoints on the selected route. Scroll
to the waypoint you want to use as the starting point with [Start
Stop] or [Light Lock]. Accept with [Next].
6.
Press [Next] to select
Navigate
.
7. If you selected a waypoint in the middle of the route, Suunto
Ambit3 Peak prompts you to select the direction of the
81