User Guide
Table Of Contents
- 1 SAFETY
- 2 GETTING STARTED
- 3 FEATURES
- 3.1 Activity monitoring
- 3.2 Alti-Baro
- 3.3 Autopause
- 3.4 Autoscroll
- 3.5 Backlight
- 3.6 Button lock
- 3.7 Compass
- 3.8 Countdown timer
- 3.9 Displays
- 3.10 Exercising with sport modes
- 3.11 Find back
- 3.12 Firmware updates
- 3.13 FusedAlti
- 3.14 FusedSpeed
- 3.15 Icons
- 3.16 Interval timer
- 3.17 Logbook
- 3.18 Memory left indicator
- 3.19 Movescount
- 3.20 Movescount mobile app
- 3.21 Multisport training
- 3.22 Navigating with GPS
- 3.23 Notifications
- 3.24 PODs and HR sensors
- 3.25 Points of interest
- 3.26 Routes
- 3.27 Service menu
- 3.28 Shortcuts
- 3.29 Sport modes
- 3.30 Stopwatch
- 3.31 Suunto Apps
- 3.32 Swimming
- 3.33 Time
- 3.34 Track back
- 3.35 Training programs
- 3.36 Weather indicators
- 4 CARE AND SUPPORT
- 5 REFERENCE
1. 2. 3.
Calibration
successful
150(150)
Auto zero
ON
Auto zero
setting...
Auto zero
You can calibrate the slope for power PODs that use Crank Torque
Frequency (CTF).
To calibrate the slope:
1. After the power POD calibration is complete, press [Start Stop].
2. Set the correct value according to your power POD manual with
[Light Lock] and accept with [Next].
3. Wait until the setting is completed.
4. Repeat procedure if setting fails or power POD is lost.
1. 2. 3.
Calibration
successful
150(150)
Slope
10.0 Nm/Hz
Setting
slope...
Slope
74