User's Guide

NOTE: If you are using intervals, you cannot activate navigation.
To train with intervals:
1. From the launcher, select your sport.
2. Before you start an exercise recording, press the lower right button to open the sport
mode options.
3. Scroll down to Intervals and press the middle button.
4. Toggle intervals on and adjust the settings described above.
5. Scroll up to Back and confirm with the middle button.
6. Press the upper right button until you are back at the start view and start your exercise as
normal.
7. Press the lower left button to change the view to intervals display and press the upper
right button when you are ready to start your interval training.
8. If you want to stop the interval training before you have completed all your repetitions,
keep the middle button pressed to open the sport mode options and toggle o Intervals.
NOTE: While you are in the intervals display, buttons work as normal, for example,
pressing the upper right button pauses the exercise recording, not just the interval training.
After you have stopped your exercise recording, interval training is automatically toggled
o
for that sport mode. The other settings, however, are maintained so you can easily start the
same workout the next time you use the sport mode.
3.19. Language and unit system
You can change your watch language and unit system from the settings under General »
Language.
3.20. Logbook
You can access the logbook from the launcher.
Scroll through the log by pressing the upper right or lower right buttons. Press the middle
button to open and view the entry of your choice.
Suunto 5
25