User's Manual
Table Of Contents
- 1. GENERAL INFORMATION
- 1.1. CHECKLIST
- 1.2. suunto t6 features
- 1.3. CARE AND MAINTENANCE
- 1.4. WATER RESISTANCE
- 1.5. REPLACING THE BATTERY
- 1.6. replacing the battery of the transmitter belt
- 1.7. heart rate transmitter belt
- 1.7.1. Activating the heart rate transmitter belt
- 1.7.2. Warnings
- 1.8. wireless speed and distance sensors
- 1.8.1. Activating the wireless speed and distance sensor
- 2. HOW TO USE YOUR SUUNTO t6
- 2.1. DISPLAY AND BUTTONS
- 2.1.1. Mode indicator
- 2.1.2. Battery level indicator
- 2.1.3. Alarm symbols
- 2.1.4. Key Lock
- 2.2. MENUS
- 2.2.1. Basic menu structure
- 2.2.2. Press and long press
- 2.2.3. Navigating in the menus
- 3. MODES
- 3.1. GENERAL INFORMATION
- 3.2. time mode
- 3.2.1. Main display
- 3.2.2. Alarm
- 3.2.3. Time
- 3.2.4. Date
- 3.2.5. General
- 3.2.6. Units
- 3.3. alti/baro mode
- 3.3.1. Use (Alti/Baro)
- 3.3.2. Alti use
- 3.3.3. Baro use
- 3.3.4. Reference altitude and barometric pressure
- 3.3.5. Memory
- 3.4. training
- 3.4.1. Stopwatch
- 3.4.2. Connect
- 3.4.3. Logbook
- 3.4.4. HR limits
- 3.4.5. Timers
- 3.4.6. Refer
- 3.4.7. History
- 3.4.8. Pair
- 3.4.9. Use (Alti/Baro)
- 3.5. SPD/DST mode
- 3.5.1. Main display
- 3.5.2. Connect
- 3.5.3. Autolap
- 3.5.4. Distance intervals
- 3.5.5. Speed limits
- 3.5.6. Calibrating wireless speed and distance sensor
- 3.5.7. pair
- 4. Using suunto t6 in training
- 4.1. Using HR and speed limits in training
- 4.2. making the most out of your training
- 5. suunto training MANAGER
- 5.1. System requirements
- 5.2. Installation
- 5.2.1. Installing Suunto Training Manager
- 5.2.2. Installing USB drivers for Suunto sport instruments
- 5.3. Suunto Training Manager features-ULLA
- 5.4. Uninstalling USB drivers for Suunto sport instruments
- 6. SUUntosports.com
- 6.1. GETTING STARTED
- 6.2. SECTIONS
- 6.3. My Suunto
- 6.4. Communities
- 6.5. Sport Forums
- 7. technical specifications
- 8. disclaimers
- 8.1. user’s responsibility
- 8.2. copyright, trademark and patent notice
- 8.3. ce
- 8.4. limits of liability and iso 9001 compliance
- 8.5. after sales service
- 8.6. disclaimer
18
3.2.2. Alarm
You can set three different time alarms. When the alarm is set, the time alarm symbol
appears on the main display.
Activating alarms
To activate an alarm:
1.In the Time menu, Alarm is the first menu item. Press
ENTER to select it.
2.Scroll to the alarm you want to set and press ENTER.
3.Press either the UP or DOWN button to change the
alarm status to On. Press ENTER.
4.Set the correct hour with UP/DOWN and press ENTER.
5.Set the correct minutes with UP/DOWN and press
ENTER. The alarm is now set and you return to the Alarm
menu.
If the alarm is set to 12-hour format, the letter A is
displayed for AM. PM is not separately indicated.
Deactivating alarms
To deactivate the alarm:
1. In the Time menu, Alarm is the first menu item. Press ENTER to select it.
2. Scroll to the alarm you want to deactivate and press ENTER. The alarm
information is displayed and the On/Off field is activated.
3. Press either the UP or DOWN button to change the alarm status to Off and long
press ENTER. The alarm symbol disappears from the main display.