User's Guide

Suunto
User guide
8(18)
The backlight has three different modes which can be changed in the
options mnu under GENERAL >> Backlight >> Backlight mode.
• Buttons: Any button press activates backlight for 8 seconds
• Normal (default): Long 7R button press activates backlight for 8 seconds
• Toggle: Long 7R button press activates backlight and stays on until 7R
button is pressed again
The backlight brightness level can also be adjusted in the options menu
under GENERAL >> Backlight >> Brightness
3.5 Countdown timer
The countdown timer can be activated from the options menu.
To activate the countdown timer:
1. Keep the middle button pressed to enter the options menu.
2. Press the middle button to enter Time & Date.
3. Scroll to Countdown and press the middle button.
4. Set hours and minutes and confirm.
5. Exit by keeping the middle button pressed.
Start and stop the timer by pressing the 7R button. While the timer is
running, you can skip to the next minute (zero the seconds) by pressing the
lower button.