User Guide

62
NOTE: If you are wearing your Suunto Ambit3 Peak on your
wrist, you will need to take it off in order to get an accurate temperature
reading because your body temperature will affect the initial reading.
9.7 Using Automatic profile
The Automatic profile switches between the Altimeter and Barometer
profiles according to your movements. When the Automatic profile is
active, the device will automatically switch between interpreting changes
in air pressure as changes in altitude or changes in weather.
It is not possible to measure weather and altitude changes at the same
time, as both cause a change in the surrounding air pressure. Suunto
Ambit3 Peak senses vertical movement and switches to measuring
altitude, when needed. When altitude is shown, it is updated with a
maximum delay of 10 seconds.
If you are at a constant altitude (less than 5 meters of vertical
movement within 12 minutes), Suunto Ambit3 Peak interprets all
pressure changes as weather changes. The measurement interval is
10 seconds. The altitude reading remains steady and if the weather
changes, you will see changes in the sea level air pressure reading.