User Guide

124
Suunto Ambit3 Peak . For more information, see the power POD
user guide.
TIP: You can also activate the heart rate belt by moistening and
pressing both electrode contact areas.
Troubleshooting: Heart rate belt pairing fails
If the heart rate belt pairing fails, try the following:
•
Check that the strap is connected to the module.
•
Check that you are wearing the heart rate belt correctly (see
11.4 Putting on heart rate belt).
•
Check that the electrode contact areas of the heart rate belt are
moist.
For more information on pairing PODs, see the POD user guide.
16.1 Using Foot POD
When using a foot POD, the POD is auto calibrated by GPS at short
intervals during exercise. However, the foot POD always remains the
source of speed and distance when it is paired and active for the given
sport mode.
Foot POD auto calibration is on by default. It can be turned off in the
sport mode options menu under ACTIVATE, if the Foot POD is paired
and is used for the selected sport mode.
NOTE: Foot POD refers to both Suunto Foot POD Mini and
any other ANT+ foot POD.
For more accurate speed and distance measurements, you can