Operation Manual
Table Of Contents
- 1 Safety instructions
- 2 Registered trademarks
- 3 RF exposure information and statement
- 4 Application
- 5 Features
- 6 Technical data
- 7 Dimensional drawing
- 8 Determining the installation point
- 9 Installing the sensor
- 10 Sensor signal outputs
- 11 Service App S4C-FS
- 12 Calibration
- 13 Maintenance
- 14 Disposal or waste
- 15 Appendix A - Modbus communication example
- 空白页面
9 Installing the sensor
For bigger pipe diameters (>200 mm) the sensor can be installed with
only a 100 mm insertion depth as alternative method. This allows one
sensor to be used for all pipe sizes.
Note: This 100 mm installation depth method requires a setting
through the Android app or the service software.
Insertion depth= x+ y+100
x = wall thickness of pipe
y = length of the ball valve
Calculation example:
A 12”-diameter pipe with the wall
thickness of 9 mm
An 87 mm-long ball valve
x=9 mm ; y=87 mm
Insertion depth
= 9 mm+ 87 mm+100 mm= 196 mm
18 S402