Operation Manual
Table Of Contents
- 1 Safety instructions
- 2 RF Exposure Information and Statement
- 3 Application
- 4 Features
- 5 Technical Data
- 6 Dimensional drawing
- 7 Installation
- 8 Sensor signal outputs
- 9 Configuration
- 10 Data logging
- 11 Calibration
- 12 Disposal or waste
- 13 12 Warranty
- 14 Appendix A Specifications
- 15 Appendix B Modbus communication example
- 16 Appendix C LRC and CRC calculation
Data logging
10.2 Operations
10.2.1 Logger settings
Control and configure the S 418 data logger through the S4C-FS App.
1. Install and launch the S4C-FS App.
For more information, see the S4C-FS Instruction and Operation
Manual.
2. Access Settings > Logger Settings to perform all logger-related
operations as listed below.
Parameter Description
Logger Status To start or stop the logger.
Start Date & Time To view the time stamp of the first log
recorded.
Stop Date & Time To view the time stamp of the last log recorded.
Number of Samples To view the number of log records in the S 418
data logger.
Sampling Rate(mm:ss) To specify the sampling rate.
10.2.2 Log analysis and export
Use the S4A software to read, analyze and export the measurement
data recorded in the S 418.
1. Download the S4A software from Support > Downloads > Apps
on the SUTO Website (http://www.suto-itec.com).
2. Install the software by double clicking the EXE file.
3. Launch the software.
4. Click the Detect menu to detect and build the communication with
the S 418.
5. Click the Read menu to read out data records logged during a
time period that you specify.
S 418 19