Operation Manual
Table Of Contents
- 1 Safety instructions
- 2 RF Exposure Information and Statement
- 3 Application
- 4 Features
- 5 Technical Data
- 6 Dimensional drawing
- 7 Installation
- 8 Sensor signal outputs
- 9 Configuration
- 10 Data logging
- 11 Calibration
- 12 Disposal or waste
- 13 12 Warranty
- 14 Appendix A Specifications
- 15 Appendix B Modbus communication example
- 16 Appendix C LRC and CRC calculation
Configuration
9 Configuration
To change any settings on the S 418, please download and install the
service App S4C-FS which is available on the Google Play store or our
Website. This App runs on any Android system with BlueTooth supported.
To be allowed to change settings, the App needs to scan the QR code on
the calibration certificate at first. This ensures that only valid users can
access the sensor settings. For more information about instructions, see
the S4C-FS Instruction and operation manual.
ATTENTION!
Changes on the settings may lead to wrong
measurement results! Contact manufacturer in case
you are not familiar with the settings.
S 418 17