Operation Manual
Table Of Contents
- 1 Safety instructions
- 2 RF Exposure Information and Statement
- 3 Application
- 4 Features
- 5 Technical data
- 6 Dimensional drawing
- 7 Installation
- 8 Sensor signal outputs
- 9 Configuration
- 10 Calibration
- 11 Disposal or waste
- 12 Warranty
- 13 Appendix A – Specifications
- 14 Appendix B - Modbus communication example
- 15 Appendix C - LRC and CRC calculation
Calibration
10 Calibration
The sensor is calibrated ex work. The exact calibration date is printed on
the certificate which is supplied together with the sensor. The accuracy of
the sensor is regulated by the on site conditions, parameters like oil,
high humidity or other impurities can affect the calibration and
furthermore the accuracy. However we recommend to calibrate the
instrument at least once per year. The calibration is excluded from the
instruments warranty. For this please contact the manufacturer.
11 Disposal or waste
Electronic devices are recyclable material and do not belong
in the household waste.
The sensor, the accessories and its packing must be
disposed according to your local statutory requirements.
The dispose can also be carried by the manufacturer of the
product, for this please contact the manufacturer.
12 Warranty
SUTO provides a warranty for this product of 24 months covering the
material and workmanship under the stated operating conditions from
the date of delivery. Please report any findings immediately and within
the warranty time. If faults occurring during the warranty time SUTO will
repair or replace the defective unit, without charge for labour and
material costs but there is a charge for other service such as transport
and packing costs.
Excluded from this warranty is:
• Damage caused by:
◦ Improper use and non-adherence to the instruction manual.
◦ Use of unsuitable accessories.
◦ External influences (e.g. damage caused by vibration, damage
during transportation, excess heat or moisture).
S 415 17