Operation Manual
Table Of Contents
- 1 Safety instructions
- 2 RF Exposure Information and Statement
- 3 Application
- 4 Features
- 5 Technical data
- 6 Dimensional drawing
- 7 Installation
- 8 Sensor signal outputs
- 9 Configuration
- 10 Calibration
- 11 Disposal or waste
- 12 Warranty
- 13 Appendix A – Specifications
- 14 Appendix B - Modbus communication example
- 15 Appendix C - LRC and CRC calculation
Sensor signal outputs
8.2 Pulse output
The sensor will send out one pulse per consumption unit. This pulse output can
be connected to an external pulse counter to count the total consumption. The
number of m
3
per second are summed up and indicated after one second.
Pulse length depends on flow rate.
Volumetric flow
[m
3
/s]
Volumetric flow
[m
3
/h]
Pulse length
[ms]
Max. pulse
output
per hour
≦ 3 ≦ 10800 120 1080
> 3 > 10800 60 2880
> 6 > 21600 30 3960
S 415 13