Operation Manual
Table Of Contents
- 1. Safety instructions
- 2. Application
- 3. Features
- 4. Technical data
- 5. Dimensional drawing
- 6. Determination of the installation point
- 7. Inlet and outlet sections
- 8. Sensor installation
- 9. Sensor signal outputs
- 10. Sensor display (option)
- 11. Service App S4C-FS
- 12. Calibration
- 13. Maintenance
- 14. Disposal or waste
- 15. Warranty
- 16. Appendix A - Analogue output
- 17. Appendix B - Modbus communication example
- 18. Appendix C - LRC and CRC calculation
1. Safety instructions
Storage and transportation
• Make sure that the transportation temperature of the sensor
without display is between -30 ... +70°C and with display between
-10 ... +50°C.
• For storage and transportation it is recommended to use the
packaging which comes with the sensor.
• Please make sure the storage temperature of the sensor is
between -10 ... +50°C.
• Avoid direct UV and solar radiation during storage.
• For the storage the humidity must be <90%, no condensation.
6 S401