Operation Manual

12. Calibration

The sensor is calibrated ex work. The exact calibration date is printed

on the certificate which is supplied together with the sensor. The

accuracy of the sensor is regulated by the onsite conditions, and

parameters like oil, high humidity or other impurities can affect the

calibration and furthermore the accuracy. However we recommend to

calibrate the instrument at least once per year. The calibration is

excluded from the instruments warranty. For this please contact the

manufacturer.

13. Maintenance

To clean the sensor it is recommended to use distilled water or isopropyl

alcohol only.

ATTENTION!

Do not touch the surface of the sensor plate.

Avoid mechanical impact on the sensor (e.g with a

sponge or a brush).

If the contamination can not be removed the sensor must be inspected

and maintained by the manufacturer.

14. Disposal or waste

Electronic devices are recyclable material and do not

belong in the household waste.

The sensor, the accessories and its packings must be

disposed according to your local statutory requirements.

The dispose can also be carried by the manufacturer of the

product, for this please contact the manufacturer.

15. Warranty

SUTO provides a warranty for this product of 24 months covering the

material and workmanship under the stated operating conditions from

the date of delivery. Please report any findings immediately and within

the warranty time. If faults occur during the warranty time SUTO will

repair or replace the defective unit, without charge for labour and

material costs but there is a charge for other service such as transport

S401 29