Operation Manual
Table Of Contents
- 1. Safety instructions
- 2. Application
- 3. Features
- 4. Technical data
- 5. Dimensional drawing
- 6. Determination of the installation point
- 7. Inlet and outlet sections
- 8. Sensor installation
- 9. Sensor signal outputs
- 10. Sensor display (option)
- 11. Service App S4C-FS
- 12. Calibration
- 13. Maintenance
- 14. Disposal or waste
- 15. Warranty
- 16. Appendix A - Analogue output
- 17. Appendix B - Modbus communication example
- 18. Appendix C - LRC and CRC calculation
11. Service App S4C-FS
11. Service App S4C-FS
Please download the service app from the Google Play in case you need
to have any settings changed on the S401. The app runs on any Android
system with BlueTooth supported. To change settings the app needs to
scan the QR code on the calibration certificate at first. This ensures that
only valid users can access the sensor settings.
ATTENTION!
Changes on the settings may lead to wrong
measurement results! Contact manufacturer in case
you are not familiar with the settings.
28 S401