Quick Start Guide
2 To change the boot sequence in an AWARD BIOS, look for the BIOS FEATURES
SETUP entry. Other manufacturers may have a dierent name for this, such
as ADVANCED CMOS SETUP. When you have found the entry, select it and
conrm with [Enter].
3 In the screen that opens, look for a subentry called BOOT SEQUENCE or BOOT
ORDER. The boot sequence looks something like C,A or A,C. In the former
case, the machine rst searches the hard disk (C) then the oppy drive (A) to
nd a bootable medium. Change the settings by pressing [PgUp] or [PgDown]
until the sequence is A,CDROM,C.
4 Leave the BIOS setup screen by pressing [Esc]. To save the changes, select
SAVE & EXIT SETUP, or press [F10]. To conrm that your settings should be
saved, press [Y].
Procedure A.2: Changing the Boot Sequence in a SCSI BIOS (Adaptec Host Adapter)
1 Open the setup by pressing [Ctrl] + [A].
2 Select Disk Utilities. The connected hardware components are now displayed.
Make note of the SCSI ID of your DVD drive.
3 Exit the menu with [Esc].
4 Open Congure Adapter Settings. Under Additional Options, select Boot Device
Options and press [Enter].
5 Enter the ID of the DVD drive and press [Enter] again.
6 Press [Esc] twice to return to the start screen of the SCSI BIOS.
7 Exit this screen and conrm with Yes to boot the computer.
Regardless of what language and keyboard layout your nal installation will be using,
most BIOS congurations use the US keyboard layout as depicted in the following
gure:
Figure A.1: US Keyboard Layout
246 Start-Up