Quick Start Guide

The dialog shows all sound cards that could be detected.
Procedure 13.1: Conguring Sound Cards
If you have added a new sound card or YaST could not automatically congure an
existing sound card, follow the steps below. For conguring a new sound card, you
need to know your sound card vendor and model. If in doubt, refer to your sound
card documentation for the required information. For a reference list of sound cards
supported by ALSA with their corresponding sound modules, see http://www.alsa
-project.org/main/index.php/Matrix:Main.
During conguration, you can choose between the following setup options:
Quick Automatic Setup
You are not required to go through any of the further conguration steps—the
sound card is congured automatically. You can set the volume or any options
you want to change later.
Normal Setup
Allows you to adjust the output volume and play a test sound during the con-
guration.
Advanced setup with possibility to change options
For experts only. Allows you to customize all parameters of the sound card.
IMPORTANT: Advanced Conguration
Only use this option if you know exactly what your are doing. Otherwise leave
the parameters untouched and use the normal or the automatic setup options.
158 Start-Up