Operation Manual
provide or remove settings to netcong. Only the netconfig update command
is available for the user:
modify
The netconfig modify command modies the current interface and service
specic dynamic settings and updates the network conguration. Netcong reads
settings from standard input or from a le specied with the --lease-file
filename option and internally stores them until a system reboot (or the next
modify or remove action). Already existing settings for the same interface and
service combination are overwritten. The interface is specied by the -i
interface_name parameter. The service is specied by the -s
service_name parameter.
remove
The netconfig remove command removes the dynamic settings provided by
a modicatory action for the specied interface and service combination and updates
the network conguration. The interface is specied by the -i interface_name
parameter. The service is specied by the -s service_name parameter.
update
The netconfig update command updates the network conguration using
current settings. This is useful when the policy or the static conguration has
changed. Use the -m module_type parameter, if you want to update a specied
service only (dns, nis, or ntp).
The netcong policy and the static conguration settings are dened either manually
or using YaST in the /etc/sysconfig/network/config le. The dynamic
conguration settings provided by autoconguration tools as DHCP or PPP are delivered
directly by these tools with the netconfig modify and netconfig remove
actions. NetworkManager also uses netconfig modify and netconfig remove
actions. When NetworkManager is enabled, netcong (in policy mode auto) uses
only NetworkManager settings, ignoring settings from any other interfaces congured
using the traditional ifup method. If NetworkManager does not provide any setting,
static settings are used as a fallback. A mixed usage of NetworkManager and the tradi-
tional ifup method is not supported.
For more information about netconfig, see man 8 netconfig.
Basic Networking 269










