Operation Manual

2
Click Boot Loader Options.
3
Change the value of Time-Out in Seconds by typing in a new value and clicking the
appropriate arrow key with your mouse, or by using the arrow keys on the keyboard.
4
Click OK twice to save the changes.
WARNING: Timeout of 0 Seconds
When setting the timeout to 0 seconds, you will not be able to access GRUB2
during boot time. When having set the default boot option to a non-Linux
operation system at the same time, this effectively disables access to the Linux
system.
10.3.4 Conguring Advanced Options
Advanced boot options can be congured via Boot Loader Installation > Boot Loader
Options. Normally, it should not be necessary to change the default settings.
The Boot Loader GRUB2 189