Operation Manual

Firmware Test
Starts a BIOS checker that validates ACPI and other parts of your BIOS. This option
is not available on the LiveCDs.
Memory Test
Tests your system RAM using repeated read and write cycles. Terminate the test
by rebooting. For more information, see Section “Fails to Boot” (Appendix A, Help
and Troubleshooting, ↑Start-Up). This option is not available on the LiveCDs.
Figure 1.1
The Boot Screen
Use the function keys indicated in the bar at the bottom of the screen to change the
language, screen resolution, installation source or to add an additional driver from your
hardware vendor:
F1Help
Get context-sensitive help for the active element of the boot screen. Use the arrow
keys to navigate, Enter to follow a link, and Esc to leave the help screen.
F2Language
Select the display language and a corresponding keyboard layout for the installation.
The default language is English (US).
10 Reference