Operation Manual

install entry. The lines separated by \ must be entered as one continuous
line without a line break and without the \.
default harddisk
# default
label linux
kernel linux
append initrd=initrd ramdisk_size=65536 \
install=nfs://ip_instserver/path_to_repository/product/DVD1
# repair
label repair
kernel linux
append initrd=initrd splash=silent repair=1 showopts
# rescue
label rescue
kernel linux
append initrd=initrd ramdisk_size=65536 rescue=1
# bios test
label firmware
kernel linux
append initrd=biostest,initrd splash=silent
install=exec:/bin/run_biostest showopts
# memory test
label memtest
kernel memtest
# hard disk
label harddisk
localboot 0
implicit 0
display message
prompt 1
timeout 100
Replace ip_instserver and path_to_repository with the values used
in your setup.
The following section serves as a short reference to the PXELINUX options used
in this setup. Find more information about the options available in the documen-
tation of the syslinux package located under /usr/share/doc/
packages/syslinux/.
28 Reference