Operation Manual
Card Selection
In the rst step, YaST looks for the network interfaces available on your system,
then displays them in a list. From the list, select the interface on which the DHCP
server should listen and click Select. After this, select Open Firewall for Selected
Interfaces to open the rewall for this interface, and click Next. See Figure 24.1,
“DHCP Server: Card Selection” (page 401).
Figure 24.1
DHCP Server: Card Selection
Global Settings
Use the check box to determine whether your DHCP settings should be automati-
cally stored by an LDAP server. In the entry elds, provide the network specics
for all clients the DHCP server should manage. These specics are the domain
name, address of a time server, addresses of the primary and secondary name
server, addresses of a print and a WINS server (for a mixed network with both
Windows and Linux clients), gateway address, and lease time. See Figure 24.2,
“DHCP Server: Global Settings” (page 402).
DHCP 401