Product Manual

ManualsBrandsSurShield ManualsLoading Dock EquipmentSafety Maker Guardrail Clamping System with Safety Boot® Guardrail Base — Yellow, 13in.L x 26in.H

1

2

3

4

5

6

7

STEP THREE

With the jaw fully extended, swing the

SurShield over the edge of the structure

and rest the base on the surface (See

Figure 3).

Unhook the locking mechanism from the

ring and slide down onto the top plate, lift

stanchion using the lift ring and place

locking mechanism into corresponding

hole depending on the thickness of the

structure (See Figure 4).

Tighten the central tension bolt while

lifting the stanchion with the ring until the

unit is snug.

Securely tighten the central tension bolt

using a 15/16 inch wrench or socket

(See Figure 5).

INSTALL CLAMP AND POST ONTO THE EDGE OF THE STRUCTURE

Figure 3

DO NOT OVER TIGHTEN THE

CENTRAL TENSION BOLT!

Figure 4

Figure 5