User manual

1
TABLE OF CONTENTS
02 Equipment & Safe Handling Procedure, Inspection
03 Quick Check List, Disposal Procedure
04 Installation, Battery Orientation
04 Cable Sizing
05 Terminals & Connection Connections
06 Parallel & Series Connections
09 Inspection & Initial Charge of Flooded Lead-Acid Batteries
10 Rolls Flooded Lead-Acid Battery Charging
10 Bulk Charge, Absorption Charge
11 Absorption Charge Time - Flooded
11 Float Charge, End Amp or Return Amps
12 Low Voltage Disconnect
13 Rolls Flooded Battery Charge Voltage Parameters
14 Temperature Compensation & Sensor Installation
15 Flooded Battery Capacity & Temperature
16 Specific Gravity
17 Battery Maintenance & Storage
17 Electrolyte - Adding Distilled Water
18 Maintenance Schedule, Storage
19 Cleaning Vent Caps
20 Equalization, Corrective Equalization
22 Preventative Equalization & Frequency
24 Rolls VRLA AGM Battery Charging Instructions
25 VRLA AGM Absorption Charge Time
25 Rolls VRLA AGM Battery Charge Voltage Parameters
26 VRLA AGM Battery Capacity & Temperature
28 Rolls OPzV GEL Battery Installation & Charging
28 Rolls OPzV GEL Battery Charge Voltage Parameters
29 OPzV GEL Absorption Charge Time
30 OPzV GEL Battery Capacity & Temperature
32 Renewable Energy Applications - Off-grid & Grid-tied
38 Warranty
40 Lead-Acid Battery Glossary
42 Troubleshooting & Frequently Asked Questions
47 Contacts