Owner manual

User Manual

Software Version 2.7

I. INTRODUCTION

The MULTIPAK is a state-of-the-art power protector/power conditioner engineered with real-time data

acquisition and storage.

1. Models: This manual applies to the following MULTIPAK models:

2. Key Features:

• Multi-Stage power protection technology

• Normal and Common Mode EMI Noise Filter

• Zero-Voltage Turn-On

• Zero-Current Turn-Off

• Inrush Current Elimination (ICE

)

• Wiring Fault Detection

• Catastrophic over/under Voltage Shutdown (COUVS

) with selectable thresholds

• Under Voltage Event Recorder (up to 999 events)

• Over Voltage Event Recorder (up to 999 events)

• Power Outage Event Recorder (up to 999 events)

• Surge Event Recorder (up to 999 events)

o Records surges in all three modes: Line-Neutral, Line-Ground, Neutral-Ground

• Event Timestamp Recorder (up to 60 events)

o Records time between events

• Additional features available when connected to a PC

(detailed in Section IV: Diagnostic Software)

3. Technical Support:

• To download software and access further product information, visit http://www.surgex.com.

• For technical support, please contact SurgeX at 1-800-645-9721.

Model Number Voltage (AC RMS) Current (AC Amps) Receptacles Input Output

SX-DS-154 120 15 4 NEMA 5-15P NEMA 5-15R

SX-DS-156 120 15 6 NEMA 5-15P NEMA 5-15R