Data Sheet
SX-1115-RT
TECHNICAL DESCRIPTION
The SA-82-AR shall be a compact mountable unit in a magnetic shielding
steel enclosure. It shall operate from 120 volts AC and include a separate
3-foot, grounded, 3-wire #18 line cord. There shall be 2 grounded AC
receptacles. Overall dimensions shall be 1.75" H x 5.31" W x 9.06" D. Weight
shall be 3.4 pounds. The SA-82-AR shall have a load rating of 8 amps at 120
volts, a self-test circuit with visual indicator, and provide EMI/RFI filtering and
catastrophic over-voltage shutdown. It shall have remote control, scheduling,
and AutoPing functions via wired Ethernet HTTP, Telnet, and DxP protocols.
It shall withstand at least 1000 occurrences of surge pulse voltages up to
6000 volts.
SA-82-AR
surgex.com
v1.0
© 2018 AMETEK Electronic Systems Protection. All rights reserved.
LOW PROFILE
SA-82-AR
8A
120V
12 W
0 Volts
6000 Volts *
Unlimited (due to current limiting) *
Unlimited (due to current limiting) *
1 KV > 500,000; 3 KV > 10,000; 6 KV > 1000
1RUPDOPRGHORDG
>20dB 27kHz - 50MHz
> 30dB 90kHz - 26MHz
30 dB @ 100 kHz; 56 dB @ 300 kHz;
64 dB @ 3 MHz; 24 dB @ 30 MHz
&RPPRQ0RGHORDG
> 10dB 360kHz - 50MHz
> 20dB 2 MHz - 40MHz
9 dB @ 300 kHz; 16 dB @ 1 MHz;
28 dB @ 5 MHz; 35 dB @ 20 MHz
No
145V
Circuit Breaker
None
Voltage NA
Current NA
Power NA
Energy NA
Temperature NA
Single 10/100 Unshielded Twisted Pair Ethernet Jack
None
None
No
No
11.375" W x 7.625" D x 1.8125" H
4.75 lbs
5C to 35C
5% to 95% R.H. Non-condensing
Conforms to UL Stds 1283 & 1449
Certified to CSA Std C22.2 No. 8
* 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41
** Specifications subject to change without notice
SPECS v.030118
Agency Listings
Over-Temperature Auto Shutdown
Measurement
Accuracy
Network Port
Serial Port
Temperature Sensor Input
Humidity Range
Auxiliary Relay Outputs
Contact Closure Input
Dimensions
Weight
Temperature Range:
SPECIFICATIONS
Voltage Rating
Over-Current Auto Shutdown
Load Rating
Power Requirement (no load)
Surge Let-through Voltage (6000 Volt Surge)
Maximum Applied Surge Voltage
Maximum Applied Surge Current
Maximum Applied Surge Energy
Endurance (C62.41-1991 category B3 pulses)
EMI/RFI Filter
Under-Voltage Auto Shutdown
Over-Voltage Auto Shutdown
D
C
A
A
B
C
D
SIZE
DWG. NO.
D
REV
DATE
NAME
DRAWN
CHECKED
ENG APPR.
MFG APPR.
MATERIAL
FINISH
DO NOT SCALE DRAWING
APPLICATION
USED ON
NEXT ASSY
1
2
3
45
6
7
8
8
7
6
5
4
3
2
1
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
E
F
E
F
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONALā
ANGULAR: MACHā BEND ā
TWO PLACE DECIMAL ā
THREE PLACE DECIMAL ā
UNLESS OTHERWISE SPECIFIED:
Q.A.
COMMENTS:
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
TITLE:
SCALE: 1:1
SHEET 1 OF 1
WEIGHT:
INTERPRET GEOMETRIC
TOLERANCING PER:
ZONE
SA-82-AR
SA-82-AR OUTLINE
A
7/16/12
JWB
.005
.010
A
RELEASE
2/24/12
JWB
SA-82-AR
FLATPAK
Surge Protector / Power Conditioner
Ready
SYSTEM ON
SELF - TEST
AXESS
ON
RST
120 VOLTS,
8 AMPS MAX
LOAD TOTAL
11.212
1.806
7.278
v1.0
© 2018 AMETEK Electronic Systems Protection. All rights reserved.
8
SA-82
SERIES MODE
®
AC POWER CONDITIONER
SURGE SUPPRESSOR
FLATPAK
POWER
SELF - TEST
120 vAC
8 AMPS MAX LOAD TOTAL
v1.0
© 2018 AMETEK Electronic Systems Protection. All rights reserved.
10.000
4.000 5.313
10.813
1.740
9.125
SA-82 OUTLINE
PRODUCT LINE
2 PLACES 3 PLACES
MACHINED SURFACE FINISH 125
REMOVE BURRS AND SHARP EDGES
DRILL DEPTHS ARE TO FULL DIA.
THREAD DEPTHS ARE TO MIN. FULL THDS
DO NOT SCALE PRINT
INCHES
±.01
INCHES
±.005
SCALE: NTS
THIRD
ANGLE
PROJ.
ANGLES
±1°
REV ECO # DESCRIPTION
UNLESS OTHERWISE SPECIFIED
TOLERANCES
TITLE
SA-82
SIZE
B
DWG NO.
SHEET OF
1
1
A
REV
APP BY/DATE
BY DATE CHK BY/DATE
A
INITIAL RELEASE
JWB
9/29/11