Data Sheet

REV.
SHEET
DRAWING NO.PROJECT
PAPER
SCALE
TOLERANCES
UNLESS NOTED
MATERIAL
FINISH
REVISIONS
REV
DATE
DESCRIPTION
BY
B
.XXX ±.005 .XX ±.01 .X ±.02 ANGULAR ±0.5°
APPROVAL
DATE
DRAWN
CHK
APPV
APPV
CAD
FILE NAME
DISK NAME
DRAWING NO.
REV.
v1.0
© 2018 AMETEK Electronic Systems Protection. All rights reserved.
STANDALONE ENCLOSURE OUTLINE, 20AMP, 2 POS
4.84
5.32
10.22
4.00
4.20
4.13
.41
NOTES:
1. THIS DRAWING IS REFERENCE.
2. OPTIONAL MOUNTING BRACKETS TO BE INSTALLED BY USER.
REMOVE TWO SCREWS EACH SIDE, POSITIOIN BRACKET,
AND RE-INSTALL SAME SCREWS.
MOUNTING HOLES ARE FOR FOUR 1/4 DIAMETER SCREWS.
SCALE: .500/1.000
MOUNTING BRACKET
QUANTITIY (2)
SEE NOTE 2
SELF-TEST
Advanced Series Mode
®
Surge Eliminator / Power Conditioner
SX-1115-RT
TECHNICAL DESCRIPTION
The SA-20-AR shall be a compact standalone unit in a magnetic shielding
steel enclosure. It shall operate from 120 volts AC and have a 9-foot,
grounded, 3-wire #12 line cord. There shall be 2 grounded AC receptacles.
Overall dimensions shall be 4.0" H x 10.2" W x 4.2" D. Weight shall be 8.5
pounds. The SA-20-AR shall have a load rating of 20 amps at 120 volts, a
self-test circuit with visual indicator, and provide EMI/RFI filtering. It shall
have remote control, scheduling, and AutoPing functions via wired Ethernet
HTTP, Telnet, and DxP protocols. It shall withstand at least 1000 occurrences
of surge pulse voltages up to 6000 volts.
SA-20-AR
surgex.com
v1.1
© 2019 AMETEK Electronic Systems Protection. All rights reserved.
STANDALONE
SA-20-AR
20A
120V
15 W
0 Volts
6000 Volts *
Unlimited (due to current limiting) *
Unlimited (due to current limiting) *
1 KV > 500,000; 3 KV > 10,000; 6 KV > 1000
1RUPDOPRGHORDG
> 20 dB, 38 kHz – 50 MHz
> 30 dB, 160 kHz – 50 MHz
25 dB @ 100 kHz; 39 dB @ 300 kHz;
60 dB @ 3 MHz; 44 dB @ 30 MHz
&RPPRQ0RGHORDG
> 10 dB, 280 kHz – 50 MHz
> 20 dB, 1.7 MHz – 50 MHz
> 30 dB, 9 MHz – 27 MHz
11 dB @ 300 kHz; 19 dB @ 1 MHz;
26 dB @ 5 MHz; 34 dB @ 20 MHz
No
No
Circuit Breaker
None
Voltage NA
Current NA
Power NA
Energy NA
Temperature NA
Single 10/100 Unshielded Twisted Pair Ethernet Jack
None
None
No
No
4.0" H x 10.2" W x 4.2" D
8.5 lbs
5C to 35C
5% to 95% R.H. Non-condensing
Conforms to UL Stds 1283 & 1449
Certified to CSA Std C22.2 No. 8
* 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41
** Specifications subject to change without notice
SPECS v.030118
Agency Listings
Over-Temperature Auto Shutdown
Measurement
Accuracy
Network Port
Serial Port
Temperature Sensor Input
Humidity Range
Auxiliary Relay Outputs
Contact Closure Input
Dimensions
Weight
Temperature Range:
SPECIFICATIONS
Voltage Rating
Over-Current Auto Shutdown
Load Rating
Power Requirement (no load)
Surge Let-through Voltage (6000 Volt Surge)
Maximum Applied Surge Voltage
Maximum Applied Surge Current
Maximum Applied Surge Energy
Endurance (C62.41-1991 category B3 pulses)
EMI/RFI Filter
Under-Voltage Auto Shutdown
Over-Voltage Auto Shutdown
NOTES:
1. SEE TABLE:
HOLE "F": 8-32 FLUSH SELF CLINCH STUD, ZINC PLATED STEEL
.38 LONG FROM OUTSIDE, PEM FH-832-6-Z1, THREADS PROTRUDE
INSIDE OF FAR WALL AND PAINT FREE.
2. UNLESS NOTED:
DIMENSIONS ARE TO OUTSIDE OF BENDS AND BEFORE PAINT.
INSIDE BENDS = R.03 MAX..BEND RELIEFS = .05 MAX.
TOLERANCES: BLANK TO BLANK= +- .005 BLANK TO BEND AND BEND TO BEND = +-.010.
3. COSMETIC SURFACES INDICATED. SEE GENERAL QUALITY SPEC GQS-0001.
4. BREAK OUTSIDE EDGES INDICATED ANS "BRK" R.005/.010
5. MATERIAL: .048 CRS (18 GA).
6. FINISH: GRAY POWDER COAT PAINT. CARDINAL T243-GR522
BRK
BRK
COSMETIC SURFACES:
TOP AND (4) SIDES,
(4) FLANGES AROUND BEND RADII
SEE NOTE 3.
TOP VIEW
B
B
A
A A
A
A A
A
A
BOTTOM
EDGE
A
A
BRK
A
A
BRK
F
F
E
GROUND STUD
THIS SIDE, REF
0.000
4.350
2.765
2.000
1.235
10.220
2.100
4.200
0.000
0.000
0.000
2.100
1.500
3.660
X2
0.400
3.800
X2
X2
0.660
REF
0.000
0.000
2.360
1.900
FAR
WALL
1.060
X2
3.910
5.910
9.160
X2
X2
X2
UP TO
BEND
RADII
X4
VERTICAL
EDGES
0.450
X4
3.662
3.950
3.175
1.025
0.810
0.400
REF
0.000
0.000
H
H
I
G
G
1.479
2.000
2.522
0.733
3.020
2.970
2.920
3.300
---ALL DIM. ARE IN INCHES UNLESS OTHERWISE SPECIFIED---
COVER, TOP, STANDALONE,
15,20-AR
DRAWN BY:
DRAWING NUMBER:
JWB
5/25/12
TITLE:
PART NUMBER:
SCALE:
DATE:
NONE
012_00029
B
012_00029
CHKD BY: SHEET
REVISION
1
OF
1
INIT:
INITIAL RELEASE
REV. E.C.N.
A
DESCRIPTION
5/25/12
DATE
REVISIONS
Ă .156
QTY
OPENING
CHASSIS & AC OUTLET
WHERE USED/REMARKS
LTR
A
B
Ă .218
REACTOR
C
Ă 1.365 X 1.135
AC OUTLET
2
2
13
JWB
LED
1
Ă .250
D
AC GROMMET
1
Ă .750 X .660
E
#8-32 GROUND STUD
1
Ă .163 +.003/-0
F
G
Ă .130 +-.003
2
LED AND RESET BUTTON
H
Ă .111
2
RJ45 MOUNT
I
.552 X .670
1
RJ45 CONNECTOR
MOVED 2 "G" HOLES.
B
9/7/12
JWB
TOL. (UNLESS
SPECIFIED):
.XX = ā.010
.XXX = ā.005
ANGLES ā 1/2Ā
SELF-TEST
Advanced Series Mode
®
Surge Eliminator / Power Conditioner
Ready