User's Guide

Step 1: Locate Your Fuse Box
Check the car owner’s manual for the fuse box location. It may
vary depending on the vehicle model. Remove the plastic panel
to access the fuse box. It may open simply by lifting a tab or
pulling it with your fingers, or you may need a trimming tool.
Step 2: Which Slot Should I use?
Use a circuit tester to test which fuse is constant (typically red) .
A fuse that is constant will stay on when the car is off. The
camera will automatically enter standby mode when the car is
not moving for 10 minutes.
22
Hardwire to the vehicle fusebox