User Manual

 DVR support Picture in Picture display (Dual camera), Front Cam display, Rear Cam display; and support time watermark.
 For power energy saving, the dvr preview screen will exit periodically (You could set up the “Auto Exit Preview” time in dvr settings) .
 G-Sensor: it will automatically lock the 10 seconds video files before and after the car collision happened during video recording. You could set up the G-Sensor
sensitivity (High--Normal--Low). The locked video files will not be automatically overwritten by Loop recording function in certain time. But if the memory card
is almost full, the systems will also start to overwrite the first locked video files and then keep video record. (If no TF card inside, this function don’t work )
Remarks: Please backup the important video/image files in time to prevent it from files accidental damage or to be automatically overwritten by systems.
 Parking Monitor: if you turn on the parking monitor function, when the dvr at sleep parking mode, the systems will automatically wake up and start to record
30 seconds video files if collision occurs. After 30s video recording, the dvr will automatically sleep again to save the power. (If the power is not enough or no
TF card inside, this function don’t work)
 Auto Reverse Parking: when get the car in reverse gear, the car dvr will automatically switch to the rear camera image with parking line preview (Image 5).
After parking signal disappear, the rear camera preview will automatically exit and back to previous preview mode.
Image 5: Auto Reverse Parking
 Front camera video resolution: High (1080P) or Normal (720P)
 Mute record: when dvr make the video recording, you could choose record the voice or not
 Video files playback: there are 2 ways to check and playback the current video files:
a) Enter “Driving Video” menu, and then click this button will enter the video files list as below (Image 6):
you could select the video files by time or by camera to playback it, also you could delete the video files you want.
Parking Line
Adjust the parking line