Manual

Operation
1. LAMP ON. Turn the Tail Cap clockwise in relation to the Lamp Housing until
snug, the Lamp will come ON.
2. MOMENTARY OFF/ON. Turn off the flashlight by rotating the Tail Cap
counterclockwise 1/8 turn from the constant ON position. Press on the rubber
Push Button on the rear of the Flashlight and the light will come ON and stay ON
as long as the button is depressed.
3. REMOVAL OF THE BELT CLIP. Unscrew Bezel and slide Belt Clip off body
of flashlight.
4. STORING. Unscrew the Tail Cap one full turn counterclockwise and the switch
is locked out.
Lamp Replacement
1. Unscrew Bezel from Flashlight Body and lift Lamp/Reflector Assembly out of Bezel.
2. Install replacement Lamp/Reflector Assembly in Bezel and reassemble by
screwing onto Flashlight Body.
Battery Replacement
1. Unscrew Bezel from Flashlight Body and shake out old Batteries.
2. Install new Batteries with the + terminal facing out.
3. Reinstall Lamp Module.
Note: Use only Duracell™ DL123A batteries in order to achieve the high output
expected from the Centurion flashlight. Do not mix old and new batteries.
Sure-Fire LLC