Model M2 Centurion Flashlight Users Manual Lithium Powered Revision A 10_1_2000
Model M2 Centurion Flashlight Introduction The Centurion uses the P60 High Pressure Xenon Lamp Assembly to produce a superlative beam rated at 65 lumens. Powered by two lithium Duracell DLl23A batteries, it has a run time of one hour. The brighter P61 Lamp Assembly, produces 120 lumens at a shorter run time of 20 minutes. Both lamp assemblies are furnished standard with the Centurion. The Model M2 Centurion incorporates features that make it the ultimate Personal Defense Light.
Sure-Fire LLC Operation 1. LAMP ON. Turn the Tail Cap clockwise in relation to the Lamp Housing until snug, the Lamp will come ON. 2. MOMENTARY OFF/ON. Turn off the flashlight by rotating the Tail Cap counterclockwise 1/8 turn from the constant ON position. Press on the rubber Push Button on the rear of the Flashlight and the light will come ON and stay ON as long as the button is depressed. 3. REMOVAL OF THE BELT CLIP. Unscrew Bezel and slide Belt Clip off body of flashlight. 4. STORING.
Sure-Fire LLC Centurion Accessories ! Hurricane Battery Pack Light - 12 DL123A Batteries in case ! Spares Carrier Model SC1 holds extra Lamp and 6 DL123A Batteries Beamshaper™& Beam Filter ! ! ! ! F24 Wide Angle Beamshaper F26 Red F16 Infrared F27 Blue Holsters/Light Transport Systems attach to belts ! ! ! ! V50 V51 V52 V53 Carry All Pouch, Black Carry All Pouch, Camo Carry All Pouch, Blue Carry All Pouch, Green
Model M2 Centurion Flashlight Specifications P60 Lamp/Reflector Assy Prefocused Light Output 65 Lumens Run Time Approx. 1 hour Lamp Type High Press. Xenon P61 Lamp/Reflector Assy Prefocused Light Output 120 Lumens Run Time Approx. 20 Min. Lamp Type Xenon/Halogen Battery Type Lithium Battery Shelf Life 5 to 10 years CAUTION The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored.
Repairs & Replacements To obtain repair or replacement call Customer Service at 800-828-8809 (toll free) or 714-545-9444 and obtain a Return Authorization number (RA). Then pack the unit carefully and return (no COD’s please) to: Laser Products Repairs Department, RA# _____ 18300 Mt. Baldy Circle Fountain Valley, CA 92708-6122 Laser Products will pay any reasonable shipping costs to return the unit to you.
