Model L7 L7 Digital LumaMax™ LED Flashlight Operator’s Manual Digitally-Controlled Five-Watt LED Rechargeable Flashlight Revision N/C 12-1-2003
L7 LumaMax LED Introduction The L7 LumaMax is fitted with a 5-watt, white LED module. Powered by a rechargeable Ni-Cd battery, the L7 features digital current regulation circuitry that matches the LED’s current requirements to the batteries’ output to achieve a consistent level of light output for the useable life of the battery. Light Activation Depress the rear pushbutton switch for momentary-on activation. For constant-on light, turn head clockwise until light is activated.
Operation Battery Replacement Unscrew LED assembly and insert battery with positive end facing toward LED assembly. Replace LED assembly and hand tighten. Depress tailcap pushbutton switch to test. Note: If battery is inserted with positive end toward the tailcap, the unit will not function but no damage will occur. Reinsert battery with positive end toward the LED assembly. Charging Charge the B90 battery using the CN400 Rapid SmartCharger or the discontinued C300 series charger.
SureFire® LED ASSEMBLY FLASHLIGHT BODY B90 BATTERY REAR PUSHBUTTON
L7 LumaMax LED Output & Runtime Accurately specifying light output (lumens) and runtime is more complicated for LED flashlights than for tungsten lamp flashlights due to slight variation in LEDs and LED output characteristics. The light output of the L7 exceeds that of comparable SureFire® tungsten lamp flashlights (6P, C2, E2e, etc.).
L7 LumaMax LED Warranty Claims For repair or replacement contact Customer Service at 800-828-8809 (toll free) or 714545-9444 and obtain a Return Merchandise Authorization number (RMA#). Then package the unit carefully and return (no COD’s please) to: SureFire Repairs Department, RMA#___ 17680 Newhope Street, Suite B Fountain Valley, CA 92708-6122 SureFire will pay any reasonable shipping costs to return the unit to you.
