Model L4 L4 Digital LumaMax™ LED Flashlight Operator’s Manual Digitally-Controlled Five-Watt LED Flashlight Revision B 10-1-2005
L4 LumaMax LED Introduction The L4 LumaMaxTM is fitted with a five-watt, white LED module. Powered by two 3-volt lithium batteries, the L4 features digital current regulation circuitry that matches the LED’s current requirements to the batteries’ output to achieve a consistent level of light output for the useable life of the batteries. The L4 LumaMax features a click-on/click-off tailcap pushbutton switch. Light Activation Partially depress the tailcap pushbutton switch for momentary activation.
Operation Battery Replacement Unscrew the bezel and insert new batteries with positive ends towards LED assembly. Replace bezel and hand tighten. Depress tailcap pushbutton switch to test. Note: If batteries are inserted with positive ends towards the tailcap, the unit will not light. Damage will not occur. Reinsert batteries with positive ends towards the LED assembly. WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged. exposed to water, fire, or high temperatures.
SureFire® LED ASSEMBLY SF123A BATTERY FLASHLIGHT BODY TAILCAP
L4 LumaMax LED Output & Runtime Accurately specifying light output (lumens) and runtime is more complicated for LED flashlights than it is for tungsten lamp flashlights. The light output of the L4 exceeds that of comparable SureFire tungsten lamp flashlights (6P, C2, E2e, etc.), and runtime is longer than the one hour specified for these tungsten lamp flashlights.
L4 LumaMax LED Warranty Claims For repair or replacement contact Customer Service at 800-828-8809 (toll free) or 714545-9444 and obtain a Return Merchandise Authorization number (RMA#). Then package the unit carefully and return (no COD’s please) to: SureFire Repairs Department, RMA#___ 17680 Newhope Street, Suite B Fountain Valley, CA 92708-6122 SureFire will pay any reasonable shipping costs to return the unit to you.